Pearl Metallic Epoxy

https://cretoseal.com/ This concrete floor had old vinyl tiles that had been recently removed. The old mastic was goopy and difficult to remove. The floors were scraped by hand, honed and sealed with Creto DPS. Creto DPS helped strengthen and increase the density of the slab while increasing the bonding of the fills. After the Creto DPS cured an epoxy primer was applied along with a pearl white metallic epoxy. The floors were then coated with a gloss urethane topcoat. Since the application was done in the peak of the summer (without AC) there were some air bubbles that appeared in the epoxy. They were abraded flat before the urethane application but were still slightly visible.