Oxidean Marine Animal Cat ii Wipeout and Bent rudder (99 Mph new PB)

Quick unedited Test run with a crosswind. 99mph new PB with 45.7mm CNC Props. Sorry for the long video.


On the 3rd pass after deceleration I steered to the left and it flipped and bent the aluminum rudder. No damage at all was made to the rudder so I am led to believe during the high speed blow over the tip of the rudder just happened to hit the water at the right angle and caused it to bend. I Bent rudder back perfectly using a vice. I ended up using a Dremel to take off a piece of the top of the rudder so it now kicks back using the stock hardware. Box Stock Strut setup settings were used.

Oxidean Marine Animal Cat II 1650kv

- 4* Graphene 4s 5000mah 100C Lipo packs (16s total)
-Skyrc GPS Module built in cowl.
-Stock Strut Adjustment.
-45.7mm CNC Props

*Battery Capacity after run 86%
*Temps were recorded at under 110F after those three back to back runs.