Making semi-auto PCP Valve for Regulated PCP | Part 1

In this video I will make a pneumatic valve for my soon to be completed regulated PCP. This operates at max. 3500 PSI, and uses a 1800 PSI output regulator, which you can buy in one of the links down below. I used aluminium to make the hammer chamber, valve, drop block connector, etc... The drop block I used was a scrap part I had left over from a year ago, so it finally got into some good use. Next part will feature making the hammer which will show the pneumatic recovery system.

Fund my projects: https://buymeacoffee.com/pcpairgunsch...

!! Keep in mind that this is just part 1 and I didn't finish the rapid system yet, so stay tuned for part 2!

LATHE used in the video:
MINI Lathe 7x16 800W (Europe and USA link): https://s.click.aliexpress.com/e/_DlY...
Asia link: https://s.click.aliexpress.com/e/_Dlt...

1800 PSI PCP regulator: https://s.click.aliexpress.com/e/_DBF... (Make sure you select the right thread as there are 2 options)
0.3L PCP tank: https://s.click.aliexpress.com/e/_Dl2...