Making a Camera Mount for a CNC

Check out the full video on this project -    • How to Make a GoPro Mount for the CNC...  

https://www.toolstoday.com/?utm_sourc...

Plans for this project are also available here - https://www.toolstoday.com/cnc-alphab...

Cutting out the camera mount project on the Stepcraft M.1000 CNC machine starting with the Amana Tool item no. 46202-K 1/4" Spektra™ coated downcut bit links to all tools below!
- - - - - -
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 50ipm
Depth per pass: .25" per pass
#short #shorts

Tools Used:

STEPCRAFT M.1000 CNC Machine
https://www.toolstoday.com/stepcraft-...
- - - - - - -
Design Software - Vectric V-Carve Pro -
https://www.toolstoday.com/cnc-machin...
- - - - - - -
Amana Tool 46202-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 3/4 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit
https://www.toolstoday.com/v-13779-46...
- - - - - - -
Fein AMM300 MultiMaster Multi-Tool
https://www.toolstoday.com/v-16470-71...
- - - - - - -
Amana Tool MR0110 Miniature 3/32 R Corner Rounding with 3/16 D Ball Bearing x 3/8 D x 3/8 CH x 1/4 Inch SHK Carbide Tipped Router Bit
https://www.toolstoday.com/v-11229-mr...
- - - - - - -
** Subscribe -    / toolstoday  

** Shop the website - http://www.toolstoday.com