CRC FiberLock Head Gasket & Block Repair - How to Use Instructional Video

A crack in the engine block could be an expensive and time consuming repair. CRC FiberLock® Head Gasket & Block Repair can permanently fix a head gasket and coolant system leak without having to drain your cooling system, and get you back on the road in as little as 30 minutes. You can repair head gaskets, engine blocks, intake gaskets, cylinder heads, freeze plus and heater cores.
You must start with a cold engine. Before you begin, read the entire product label and be sure to wear eye protection and gloves when working on your vehicle.
Check the treatment ratio on the label. Remove the radiator cap. Ensure the fluid level is low enough to add the correct amount of FiberLock. Do not overtreat. Shake the bottle well for 30 seconds. And then start your vehicle. Slowly add FiberLock in the radiator. Be sure Not to exceed the capacity of your radiator. Replace the radiator cap. turn the heater on to high and let the vehicle idle for 20 minutes. Drive for 10 minutes. Turn the vehicle off and let it cool down. Once the engine is fully cooled, check the radiator. Add coolant if the level is low. If the leak persists after 200 miles in five days, you can repeat treatment. If the leak persists after second treatment, you may need a professional repair. So Stop Leaks and Start Driving with CRC FiberLock® Head Gasket & Block Repair

More information: https://www.crcindustries.com/product...

Follow Us On:
Instagram:   / crcauto  
Facebook:   / crcauto  
LinkedIN:   / crc-industries