How to Replace Intake Manifold 2012-2018 Nissan Altima 2.5L L4

Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/43/V/intake-manifold

This video shows you how to install a new intake manifold from TRQ on your 2012-2018 Nissan Altima (2.5L L4). The intake manifold is responsible for delivering the fresh outside air into the engine, and is also sometimes where the fuel is adding to the air mixture. A cracked or leaking intake manifold can cause a variety of problems for your engine, and should be replaced.

This repair was done on a 2016 Nissan Altima Base 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Nissan Altima
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obAo/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/obAo/1AXAA00013
• Pocket Screwdriver
• 10mm Wrench http://1aau.to/o8g/1AXAA00010
• 10mm Socket http://1aau.to/obxv/1AXAA00017
• 12mm Socket http://1aau.to/obUc/1AXAA00015
• 13mm Socket http://1aau.to/obUc/1AXAA00015
• 14mm Socket http://1aau.to/obUc/1AXAA00015
• 8mm Socket http://1aau.to/obxv/1AXAA00017
• Fuel Line Disconnect Tool http://1aau.to/oaw/1AXAA00041
• Trim Tool Set http://1aau.to/oaqf/1AXXX00006
• Vacuum
• Needle nose pliers http://1aau.to/oHf/1AXAA00051
• Needle nose pliers http://1aau.to/oHf/1AXAA00052
• Pliers
• T25 Torx Driver
• 1/4 Inch Ratchet http://1aau.to/obxv/1AXAA00017
• Ratchet http://1aau.to/obW6/1AXAA00016
• Cloth Rags http://1aau.to/oJQ/1AXSS00035
• Gloves http://1aau.to/oaKt/1AXSS00048
• Hose Clamp
• Paper Towels http://1aau.to/oJQ/1AXSS00035
• Safety Glasses
• Sandpaper
• 5mm Hex Wrench
• Pick http://1aau.to/oXj/1AXAA00037
• Sanding Block

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.