Landcruiser 250 - Rago Fabrication Ditch Light Install

Описание к видео Landcruiser 250 - Rago Fabrication Ditch Light Install

We went ahead and installed the CLEANEST-looking Ditch Light Brackets currently available here from ‪@RagoFabrication‬

https://www.ragofabrication.com/colle...

In order to complete this install you will need the following:
10mm Socket or Wrench
Rivnut tool: https://amzn.to/3DpUZxg
4mm (4) allen/hex tool or T25 (torx)
17/64th and 25/64th Drill Bit
Tape Measure and Masking Tape
Rotary/Dremel (not mentioned in instructions)
Pen/Sharpie/Marking Tool

This is a straight forward install process, and with a little common sense it will go A LOT quicker. Highly recommend you watch the video, specifically WHERE and how to drill, before starting as we found a MUCH simpler process.

Комментарии

Информация по комментариям в разработке

Похожие видео