How to replace the Front Wheel Hub Bearing 2009-2018 Dodge RAM 1500 🚗

Find the parts used in the video on CarParts.com just there https://carparts.solutions/RAM1500

⚙️ NEEDED CARPARTS AND PRODUCTS
Wheel Hub Assembly : https://carparts.solutions/WheelHub_R...

Penetrating oil

💪 TIGHTENING TORQUES
Wheel hub bearing holding bolts : 134 Ft-lbs

Upper control arm ball joint nut : 40 Ft-lbs + Additional 200 degrees

Wheel hub nut : 185 Ft-lbs

Brake cliper mount bolts : 130 Ft-lbs

🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Dodge RAM 1500 :
https://carparts.solutions/ToolBox

List of the tools we used to replace the wheel hub bearing on a Dodge RAM 1500 :
Hydraulic jack : https://carparts.solutions/FloorJack
Jack stands : https://carparts.solutions/JackStands
Wheel lug wrench
Wire brush
Crowbar
Ratchet
36mm socket
Clamp or iron thread
21mm socket
Flat head screwdriver
21mm wrench
10mm wrench
Hammer
Sandpaper
Torque wrench :
20 to 250 Ft-lbs https://carparts.solutions/TorqueWren...
100 to 600 Ft-lbs https://carparts.solutions/TorqueWren...

Don't forget to subscribe :    / @carpartscomofficial  

🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
2009 RAM 1500
2010 RAM 1500
2011 RAM 1500
2012 RAM 1500
2013 RAM 1500
2014 RAM 1500
2015 RAM 1500
2016 RAM 1500
2017 RAM 1500
2018 RAM 1500

📽 🛠 USEFUL VIDEOS 🛠 📽
How to jack your RAM1500 safely :    • How to jack your 2009-2018 Dodge RAM ...  

How to replace the Front Brakes 2009-2018 Dodge RAM 1500 🚗 :    • How to replace the Front Brakes 2009-...  

⚠️ CARPARTS.COM'S INFOS
You must disengage the upper control arm ball joint of the wheel knuckle.

Don't forget to remove the cable that you used to hold the caliper assembly together.

🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.

📚 CHAPTERS
0:00 Intro
0:10 How to lift your RAM 1500
0:41 Loosen the wheel hub nut
1:21 Remove the caliper assembly
1:50 Remove the brake disc
2:01 Remove the hub nut
2:30 Remove the ABS sensor cable
3:09 Remove the upper control arm ball joint
3:42 Unscrew the wheel hub
3:55 Remove the wheel hub + clean the hub
4:20 Install the new wheel hub
4:49 Screw the wheel hub back + tightening torques
5:08 Insert the CV Axle and control arm ball joint
5:28 Screw the hub holding nut back + tightening torques
5:48 Reconnect the ABS sensor cable
6:15 Put the brake disc back
6:25 Put the caliper assembly back
6:42 Put your RAM 1500 on the ground