How to Insulate Your Workshop | An Easy DIY Project | Keep Your Shop Warm or Cooler

Keeping your workshop warm in winter or cool in summer ensures you get the most of the space all year round. In this video I show you how I installed Cellotex insulation to a single skin brick garage here in the UK.

Special thanks to Keith Brown at Rag'n'Bone Brown on youtube who has accomplished a similar project over the summer of 2019 and who kindly gave me a shout-out on Instagram and YouTube recently.

You can find Keith's Channel at:
   / @ragnbonebrown  

The acoustic adhesive and sealant I used in the video was AC50 900ml from Everbuild and purchased from Amazon UK:
https://amzn.to/2YDdHME

The insulation materials used were:
Celotex PL4000 Insulated Plasterboard 40mm + 12.5mm
Celotex TB4000 Insulation Board 40mm
These materials were purchased from Insulation Express in the UK.
https://www.insulationexpress.co.uk/

The Masonry Screws, Plastboard Screws, Foil Tape, 100mm Damp Proof Course and Filler were obtained from Screwfix in the UK
http://www.screwfix.co.uk

All timber screws were Axminster Woodspur screws (Torx and Pozidrive) and can be ordered on-line from:
https://www.axminster.co.uk/adhesives...

The MDF was purchased from B&Q Milton Keynes.
https://www.diy.com/

The paint was from Dulux and was really easy to apply. If you want a top-tip from me, don't skimp on the paint or the primer. Correctly applied they'll protect the walls from moisture.
Dulux paints are widely available, including Amazon.
https://amzn.to/33phiMV

AMZN: * As an Amazon Associate, I earn from qualifying purchases made through these links.


Wherever possible links are to actual products used, but this is not always possible, for example some products are not available outside the UK in which case I have selected something similar.