DIY Build MQ-9 Reaper UAV Drone - Foam RC plane 2500 mm

This is the first time I make a glider like model aircraft. I build and make the plans for this MQ-9 Reaper because there are many request for this UAV drone and it looks cool with all bombs and missiles it can carries. Learning from many previous model on Youtube videos, I decided to make the size of it with 2500mm wingspan, to give lighter wing loading. I enlarge the wing area almost doubled also made the stabilizers a bit bigger then the scale for maintaining stabilization. Surprisingly it take off without any issue and fly very stable and floating.

SUBSCRIBE and Like to support this channel
#rcplane #depron #mq9reaper

You can download the plans and on the link below :
A4 Plans : https://paper-replika.com/RCplans/PR_...
A0 Plans : https://paper-replika.com/RCplans/PR_...
Decal : https://paper-replika.com/RCplans/MQ-...

Build instructions :
https://paper-replika.com/index.php/r...

DONATE via Paypal : [email protected]

Join this channel to get access to perks:
   / @juliusperdana  

Playlist :
00:00 Opening
00:33 Making wing with 5mm foam
05:18 Making landing gear
06:40 Building the fuselage
10:31 Making V-stab
13:06 Install brushless motor
16:09 Covering with laminating film
18:49 Applying decals with painted vinyl stickers
19:49 Making pylons with 3mm foam and plywood
21:26 Attaching aileron hinges
22:06 Making camera holder from paper
23:21 Making hellfire missile with paper
25:46 Balancing 3 blade prop
27:25 Installing stabilizer servo and linkages
29:27 Maiden flight
32:25 Second flight
34:58 Next Episode?


Specs :
1. Wingspan 2500 mm / 98.4 inches
2. Flying weight : 1800 grams/ 63.5 oz
3. Wing loading :33.7 gram/dm2 - 11 oz/sq.ft.
4. Wing cube loading : 4.6
5. Wing Area : 53.46 dm2 / 829 sq.in.
6. CG : 8 cm / 3.14 inch from LE (leading edge on root chord)

Electronics
DXW 3536 1200kv
50A ESC
Battery Lipo 3S 2200mah
3 x 9 gram servos (micro servo)
1 X standard servo
50mm, 60mm foam wheels

Materials :
1. 5mm + 3mm Foamboard/ Depron/ Polyfoam
2. 3mm + 9mm Plywood
3. 0.1mm Mica Plastic
4. hot glue, UHU glue, CA glue
5. laminating film    • Making RC Flying Wing  - Easy to buil...  

Tools :
1. Hot glue gun
2. Heat gun
3. Covering iron