Lee Double Motion Jacketed Kettle, Mokon Boiler & Waukesha Positive Displacement Pump Demonstration

This is the demonstration of the Lee Double Motion Jacketed Kettle, Mokon DR4018AFW01 water heater and Waukesha 15 Positive Displacement Pump

Lee, Model 100D9MT, 316 stainless steel skid mounted jacketed kettle with hot water circulation. Vessel Dimensions: 36" diameter x 28" deep with a 13" straight wall. Equipped with a Mokon DR4018AFW01 water heater, flush mount sensor, tilt out bridge mounted scrape agitator powered by a single 3 Hp drive and 3½" OD / 3"ID tri-clamp style discharge with ball valve with 28" ground clearance. Mounted on stainless steel frame with casters.

Water Supply To Heater: 1" NPT

MAWP: 90 PSI @ 332° F
MDMT: -20°F @ 90 PSI
Nat'l Brd: 15129

OAD: 92"L x 50"W x 80"H

&

Waukesha, Model 15, positive displacement pump with 316 stainless steel contact parts. Rated from 1 to 10 gallons of product per minute - depending on materials, application and machine configuration. 200 psi maximum working pressure, temperature range of -40 Deg F to 200 deg f standard and up to 300 deg F with hot clearence rotors / stators and viton seals and capable operating both clockwise, or counter clockwise. Equipped with a 2" OD / 1½" ID Tri-clamp style product charge / discharge with 11" ground clearance. Powered by a 2 Hp drive with a variable speed controller and a 3:1 gear ratio for a maximum current rate of 7.5 gal/min. Mounted on a 45" long x 18" wide stainless steel push cart.

OAD: 45"L x 18"W x 44"H