3 Point Saddle - Small Obstruction

In this video I will educate you on how to measure, layout & bend a 3 point saddle with the Half Method. The Half method is an ordinary 3 point saddle using a 22.5 degree center bend and 11 degree side bends, totaling 45 degrees. This is can prove to be extremely useful when you are in a situation that you need to get around multiple obstruction therefore you need to make more then a single bend. This saddle gives you the freedom of using up most of that 360 degrees that you are allowed before you need to mount a j-box. Secondly, this saddle is most useful when you are bending over a small obstruction for example a 3/4" conduit. Most of the time it can be difficult to bend a saddle with 45 or 30 degree bends because the layout of bends becomes to close together. With the Half Method you get the spacing you need to make a clean professional looking saddle. I hope this helps you out in the field.
Multiplier = 5
Shrink/Center adjustment = 3/16" for every 2" of Rise
Center Bend - Use Notch
Side bends - Use Arrow

Check out my Playlists

Conduit Bending
   • Conduit Bending  

Greenlee Mobile & Table Bender Series
   • Greenlee Mobile & Table bender Series  

Multiple Bends
   • Multiple Bends  

Segment Bending Mini-series
   • Segment Bending Mini-Series  

Podcasts
   • Podcasts  

Advanced Conduit Bending
   • Advance Conduit Bending Series  

Electrical Code Calculations
   • Electrical code calculations  

Tool unboxings
   • Tool Unboxings  

Quick Bend App
   • Quick Bend App  

To support the channel, the links are below

Paypal.me/melrub480v
www.venmo.com/MelRub480v
https://www.amazon.com/hz/wishlist/ls...
view and edit Holmz Law Amazon wish list
https://www.amazon.com/hz/wishlist/dl...

Please follow me on these social medias and communities:

Facebook/holmzlaw
Facebook/The Art of Conduit bending
Instagram/holmzlaw
Linkedin/MelvinRubio
Twitter/holmzlaw
Tradehounds/holmzlaw
Reddit/holmzlaw
Reddit/r/conduitology
Discord
  / discord  
#Holmzlaw #Conduitology #TopRackBenders