Wire wrap pendant tutorial "Nola" Part 1!

Hello and welcome to my latest tutorial.
Part 2 is here...   • Видео  

To make this pendant you will need ;
• 1.5mm wire (14g) 1 x 4.5" (11.5cm)
• 1.5mm Half Round wire (14g) 1 x 2.5" (6.5cm)
• 0.8mm wire (20g), 2 x 9" (23cm)
• 0.315mm weaving wire (28g) 200cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• Teardrop cabochon, mine is 15mm by 10mm (you can use a similar size, just remember to adjust wire length and weave repeats accordingly)
• Jump ring, 8mm outside measurement (or whatever size you have handy)


I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)

Facebook -   / kellyjjewellery  
IG - kellyjjewellery
My Etsy store - (where you can see my tutorials and jewellery for sale)
https://www.kellyjonesjewellery.etsy.com

Thanks for watching x

Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/infraction/summe...
License code: NRTIUEVJQPGMALWZ