Скачать или смотреть 💎 How To Scan Free Digital / Antenna Channels On Newmaxs+ Decoder

How To Scan Free Digital / Antenna Channels On Newmaxs+ Decoder

To scan for free digital/antenna channels on a Newmax S+ decoder, you can typically follow these steps:

1. **Connect the Antenna/Cable**: Ensure that your antenna or cable is correctly connected to the input port on your Newmax S+ decoder.

2. **Power On the Decoder**: Plug in your Newmax S+ decoder and turn it on using the power button on the decoder or the remote control.

3. **Access the Menu**: Use the remote control to access the menu. Press the "Menu" button, which is typically labeled and may have an icon that looks like a list or menu.

4. **Navigate to Installation/Setup**: Within the menu, find and select the "Installation," "Setup," or a similar section. Navigate using the arrow keys on the remote control.

5. **Select Channel Search or Auto Scan**: Look for an option labeled "Channel Search," "Auto Scan," "Auto Search," or similar. This option initiates the scanning process for available channels. Select it.

6. **Start Scanning**: Confirm your selection to begin the scanning process. The Newmax S+ decoder will search for available digital and antenna channels automatically.

7. **Wait for Scanning to Complete**: Allow the scanning process to complete. This may take a few minutes, depending on the number of channels available and the strength of your antenna signal.

8. **Save Channels**: After the scanning is complete, your Newmax S+ decoder will display a list of available channels. You'll likely have the option to save these channels to the decoder's memory.

9. **Exit Menu**: Once you've saved the channels, exit the menu by pressing the "Exit" or "Back" button on your remote control.

10. **Enjoy Watching**: You should now be able to enjoy watching the free digital and antenna channels that were scanned and saved on your Newmax S+ decoder.

If these steps don't match your Newmax S+ decoder model, please refer to the user manual that came with your decoder for specific instructions tailored to your device.

___________________________________
LINKS


WEBSITE:

https://www.pbteck.com






INSTAGRAM;


  / pbtecknology  


FACEBOOK;


  / pbtecknology  


TWITTER


  / pbtecknology  







TELEGRAM:


https://t.me/pbtecknology








#pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire





To scan for antenna/digital channels on a Newmax S+ decoder, you can follow these steps:

1. **Connect the Antenna/Cable**: Ensure that your antenna or cable is correctly connected to the input port on your Newmax S+ decoder.

2. **Power On the Decoder**: Plug in your Newmax S+ decoder and turn it on using the power button on the decoder or the remote control.

3. **Access the Menu**: Using the remote control, navigate to the menu by pressing the "Menu" button. This button is typically labeled and might have an icon that resembles a list.

4. **Navigate to Installation/Setup**: Within the menu, navigate to the "Installation," "Setup," or a similar section. You can usually move through menu options using the arrow keys on the remote control.

5. **Select Channel Search or Auto Scan**: Once you're in the Installation or Setup section, look for an option labeled "Channel Search," "Auto Scan," "Auto Search," or something similar. Select this option.

6. **Start Scanning**: Confirm your selection to begin the scanning process. The Newmax S+ decoder will search for available antenna/digital channels automatically.

7. **Wait for Scanning to Complete**: Allow the scanning process to complete. This may take a few minutes, depending on the number of channels available and the strength of your antenna signal.

8. **Save Channels**: After the scanning is complete, your Newmax S+ decoder will display a list of available channels. You usually have the option to save these channels to the decoder's memory.

9. **Exit Menu**: Once you've saved the channels, exit the menu by pressing the "Exit" or "Back" button on your remote control.