3D carving on desktop CNC from OpenBuilds

Hi Guys!
Below you can find few ways to support the channel...thanks:

CNC router Bits (Starter kit)
https://geni.us/LiJ5vH

My Etsy store:
https://www.etsy.com/uk/shop/Falcon39...

My patreon page:
https://patreon.com/Falcon390CNCWorks...

OpenBuild CNC machine:
https://openbuildspartstore.com/lead-...

OpenBuild probe:
https://openbuildspartstore.com/xyz-t...

OpenBuild store:
https://openbuildspartstore.com/?ref=...

Email @:
[email protected]

Second channel-FALCON390 Workshop
   / @falcon390workshop  

.......................................................................................................................
Information about the toolpaths from my CNC project:

Toolpath: 3D Roughing
Toolpath Info
Time Estimate: 00:16:50
Toolpath Type: Rough Machining Toolpath
Feed Rate: 2600 mm/min
Plunge Rate: 381 mm/min
Spindle Speed: 18000
Tool InfoTool Name: End Mill (6 mm)
Tool Type: End Mill
Tool Number: 1
Max Cut Depth: 14.817mm
Pass Depth: 3.5mm
Stepover: 4.8mm
.......................................................................................................................
Toolpath: 3D Finish 1
Toolpath Info
Time Estimate: 01:14:24
Toolpath Type: Finish Machining Toolpath
Feed Rate: 1500 mm/min
Plunge Rate: 700 mm/min
Spindle Speed: 18000
Tool InfoTool Name: Ball Nose (2 mm)
Tool Type: Ball Nose
Tool Number: 1
Max Cut Depth: 14.837mm
Stepover: 0.2mm
.......................................................................................................................
Toolpath: Outline
Toolpath Info
Time Estimate: 00:02:30
Toolpath Type: 2D Profile Toolpath
Feed Rate: 3000 mm/min
Plunge Rate: 700 mm/min
Spindle Speed: 18000
Tool InfoTool Name: End Mill (4mm)
Tool Type: End Mill
Tool Number: 1
Max Cut Depth: 18mm
Pass Depth: 4mm
Stepover: 3.2mm
.......................................................................................................................
#CNCrouterproject
#DesktopCNC
#OpenbuildsCNC
#Woodworking