Скачать или смотреть Overhaul HydraMatic 440-T4 / 4T60 Automatic Transmission - Part_2

Part 1 -    • Overhaul HydraMatic 440-T4 / 4T60 Automati...  
Part 2 -    • Overhaul HydraMatic 440-T4 / 4T60 Automati...  
Part 3 -    • Overhaul HydraMatic 440-T4 / 4T60 Automati...  

In this series of videos, I am rebuilding a General Motors 440-T4 (also called 4T60) front wheel drive 4-speed automatic transmission. This transmission job was ORIGINALLY going to be an in-frame job, but due to the damage found, I had to remove the unit to change the torque converter.

There are 3 videos, each about 30 minutes. In the first video, I combine a slideshow of the teardown and sub-assembly overhaul with a video of valvebody checkout. Parts 2 and 3 are live video of me re-assembling the unit.

The books I used are the ATSG (Automatic Transmission Service Group) 'TECHTRAN' factory manuals. See HTTP://WWW.ATSG.BIZ for the books. The books are simply titled "THM 440 T4 / 4T60 Techtran" and "THM 440 T4 Update" and "...Upate Volume II" These books cover the various modifications the factory did in the 1984 to 1339 production run of this transmission. This is very important when you are buying a junkyard transmission to use for parts, as the books show compatibility and identification of the parts.

The parts for the job were ordered from Transtar. All the parts to renew this unit to like-new condition cost about $400. This includes the pump shaft and bearing, all seals/gaskets, the 2nd clutch plates, torque converter, bushing kit (from Transtar) as well as a junkyard transmission to get the pump.

This is dedicated to my fellow car club members at HTTP://WWW.A-Body.net and HTTP://WWW.LeSabreT.com who have often asked to see what's involved in a transmission job.