Chairs So Creative You'll Want To Make Them

First, I cleaned these woods with a wire brush so that the cement on it is cleaned and the blades do not slow down, 00:00 started work -then I grated the logs with a grater 00:17 in an L shape, and then I cut them with a bandsaw to the sizes I wrote below. The cut sizes should be 2 mm larger on each side.
Cut with a band saw: 00:46
45*5*3=2
25*5*3=4
55*5*3=4
90*5*3=2
Then I took out the model of the ladder chair on an additional plywood and started to make the ladder chair from the model. First, I made two long legs that are connected to the back of the chair, and I bent the back part a bit. be measured the same.
06:41 Cutting angles
I cut all the wood with the angles that I cut with the pattern.
07:16 hole work
I made holes with a 10 mm drill to connect two sticks to each other
08:20 Making the back of the chair
And then I made 2 cm grooves for the floor of the seat with a jigsaw.
And then I started cutting wooden pins
cutting wooden pins 09:02
I assembled the seat without glue to create the ladder grooves on it.
10:37 Start assembling the seat
Then I put the chairs in the woodworking clamp and let it dry for 12 hours And then I assembled the back of the seat
00:00 into
13:25 Cutting ladder soles
14:51 Complete assembly
16:22 Assembling the floor of the seat
17:20 Hinge installation
19:13 Sanding and polishing
19:31 Chair paint
20:07 Display and resistance test
thank you for watching.
   • I Turned This RUSTY AXE Into A Work O...  
   • 100 Y-O Antique NIKE Swedish Jack! 10...  
   • I Turned A $1 Hammer Into A Work Of Art!  
   • 1975 German Vise - Perfect Restoration  

Facebook : https://www.facebook.com/profile.php?...

TikTok : https://www.tiktok.com/@howtorestorat...

Contact Info: [email protected]
About Me:
My name is Behnam and this is the How to restoration channel. My grandfather was a carpenter and my father continued to do the same, and since I have lived with tools since I was a child, I have a strong interest in them. I believe that old tools It should not be thrown away, it should be restored and used again. I believe that everything that is older and has been made before has a solid structure and is very durable and made with principles. All tools today are mass produced with very low quality. My way of thinking is that I was born in 1990 and I will leave the world once, so I do what makes me feel good. I haven't tested many tools yet and I want to reach them one day and my art. I will create with those tools. I earn from YouTube and if you want to support me in this way, I would appreciate it if you subscribe to my channel and follow the videos.t, dear ones .
Subscribe:
   / @howtorestoration  

Creative Projects Using Extra Wood Chair Making
Chair making
how to make an Chair Making
Learning how to make a chair
Woodworking DIY
Creative Projects Using Extra Wood
DIY Wood Chair Making
how to craft a chair
Chair
restoration
restaurar
old
rust
antique
vintage
restoring
rusty
restore
repairing
welding
woodworking
sandblasting
lathe
workshop
abandoned
diy
repair
restored
renovation
asmr
restorations
rescue
реставрация
pistol
restauration
tool
drill
broken
restauracion
ladb
cleaning
tysytube restoration
console restoration
bike restoration
restoration videos
wood working
rusty restoration
gun restoration
positive thinking
#restoration
#DIY
#craft
#antique