How to Replace Rear Shock 2002-2005 Ford Explorer

Buy Now!
New Shock & Spring Assembly from 1AAuto.com http://1aau.to/ia/1ASHA00445

This video shows you how to install rear shocks on your 2002-2005 Ford Explorer. A shock and spring complete assembly simplifies installation. You don't need to separate the spring from the shock absorber.

This process should be similar on the following vehicles:
2002 Ford Explorer
2003 Ford Explorer
2004 Ford Explorer
2005 Ford Explorer

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/op4/1AXAA00013
• Pry Bar http://1aau.to/oen/1AXAA00020
• 13mm Wrench http://1aau.to/oeg/1AXAA00010
• 14mm Wrench http://1aau.to/oeg/1AXAA00010
• 18mm Socket http://1aau.to/ogY/1AXAA00043
• 21mm Socket http://1aau.to/ogY/1AXAA00043
• Torque Wrench http://1aau.to/ojy/1AXAA00044
• Rust Penetrant
• Hammer http://1aau.to/oem/1AXAA00091
• Jack Stands http://1aau.to/oep/1AXAA00065

Subscribe:    / @trq  

Check out our playlist:
Ford Explorer 2002-2005 3rd Generation:    • Ford Explorer 2002-2005 3rd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.