Behringer Eurolight LC2412 How to Program DMX Channels

This is a tutorial on how to assign DMX addresses to the control channels on a Behringer Eurolight LC2412 and includes some basic operation of the LC2412. The fixtures used in this demonstration are two Chauvet 4 bar lights, and two American DJ Flat Par Tri7X LCD par lights. The 4 bars have 15 DMX channels, the first DMX address was set to 001 on both 4 bar lights, so they act as copies of each other. The Flat Pars Tri7Xs were used in a 7 channel DMX mode, and were both set to address 016 (the first available address after the 4 bar's 15 channels.

Total Channel addressing
Board Channel; DMX Address function
1;4,10 red 4 bar lights 1 and 3
2;5,11 green 4 bar lights 1 and 3
3;6,12 blue 4 bar lights 1 and 3
4;7,13 red 4 bar lights 2 and 4
5;8,14 green 4 bar lights 2 and 4
6;9,15 blue 4 bar lights 2 and 4
10;3 4 bar strobe
11;2 4 bar master dimmer
12;1 4 bar program
13;16 red tri7x
14;17 green tri7x
15;18 blue tri7x
16;19 color macros tri7x
17;20 strobe tri7x
18;21 programs tri7x
19;22 master dimmer tri7x

Link to forum post about the LC2412 (not kind to this poor little misunderstood board)
http://www.controlbooth.com/forums/li...