How to Replace Lower Control Arm with Ball Joint 2012-2018 Nissan Altima

Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/562/eB/control-arms

This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2012-2018 Nissan Altima. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This repair was done on a 2016 Nissan Altima Base 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Nissan Altima
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima

Tools you will need:
• Pry Bar http://1aau.to/o3U/1AXAA00020
• 21mm wrench
• 10mm Socket http://1aau.to/obvk/1AXAA00017
• 19mm Socket http://1aau.to/oavN/1AXAA00043
• 21mm Deep Socket http://1aau.to/oavN/1AXAA00043
• 32mm Socket http://1aau.to/odx/1AAST00003
• Large Locking Pliers
• Needle nose pliers http://1aau.to/oGS/1AXAA00051
• Needle nose pliers http://1aau.to/oGS/1AXAA00052
• Side Cutters
• Ratchet http://1aau.to/obUM/1AXAA00016
• Socket Extensions http://1aau.to/obRU/1AXAA00015
• Torque Wrench http://1aau.to/oaXZ/1AXAA00044
• Anti-Seize Grease
• Gloves http://1aau.to/oaG6/1AXSS00048
• Safety Glasses
• Chisel http://1aau.to/omR/1AXAA00055
• Floor Jack http://1aau.to/oam8/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/o9X/1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.