Скачать или смотреть Log and FLASH the ECU on your Subaru from a Linux-Based Raspberry Pi Touchscreen Headunit

For the Subaru Wrx/Sti/Legacy/Forester crowd, I go over how to log AND READ/FLASH….(yes FLASH!)….from a raspberry pi/linux based touchscreen headunit. This one took some time but was totally worth it as I dont have to bring my laptop with me anymore.

0:00 Why Im doing this
1:25 What is needed/cost
10:14 Raspberry pi imager
11:52 Setup 32bit Operating System for Romraider
24:28 Setup 64bit Operating System for FastECU/flashing
30:37 In car - logging and flashing
36:41 FastECU defs and settings

Raspberry pi 5
https://a.co/d/awLpKZz


Raspberry pi touchscreen 2
https://www.adafruit.com/product/6079

Raspberry pi 5 cooler
https://a.co/d/44gk8pX

12v to 5v/6a voltage regulator
https://a.co/d/a1uqixS

Usb extender/switch
https://a.co/d/4WZU8A5

Usb elbow
https://a.co/d/elCCKGU

Usb c elbow
https://a.co/d/7QrpdBM

Ultra fast USB
https://a.co/d/f9DgI35

Romraider
https://www.romraider.com/index.php/R...

Driver for tactrix cable
https://github.com/dschultzca/j2534Fa...


FastECU download link
https://github.com/miikasyvanen/FastE...


Various commands/lines to run in terminal

For rules.d file the line added is as follows:SUBSYSTEM=="usb", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="cc4d", GROUP="dialout", MODE="0666"


After unzipping flatpak for FastECU navigate to that directory in the terminal and run:flatpak-builder --arch=aarch64 --force-clean --user --disable-cache --install-deps-from=flathub --repo=repo --install ./fastecu ./fi.fastecu.FastECU.yml

  / pnwgc8