Скачать или смотреть Red Devil Construction Adhesive - How to Use Construction Adhesive

Subscribe for new videos and visit https://www.reddevil.com/ to see our products.

RED DEVIL GENERAL PURPOSE CONSTRUCTION ADHESIVE

• ECO-FRIENDLY
• NO SOLVENTS
• MULTI-PURPOSE
• WATER CLEAN UP

INFO:

This professional-strength, VOC-complaint formula exceeds the performance requirements of ASTM C-557 and is ideal for wood stone, hardboard, gypsum wallboard, slate, ceramic tile, polyurethane and polystyrene foams.

USE ON:

Wood flooring, lumber, treated lumber, trim & paneling, drywall, metal, foam-board/plastic, masonry/concrete.

DIRECTIONS:

• Surfaces must be clean and free of any material that may prevent adequate adhesion.

• Cut tip on slant for a 1/4" to 3/8" bead size and place in caulk gun.

• Apply adhesive to one of the surfaces in either a continuous or spot bead.

• Press surfaces together firmly with a slight twisting motion. Certain large applications may require additional bracing until the adhesive has dried.

CLEAN UP:

Tools and adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesives may be cleaned with mineral spirits.

WORKING TIME: 15 minutes

GUIDELINES:

Not designed for continuous submersion. Not recommend for tub surround. Not for bonding mirrors. For best results, store above 40°F.

COVERAGE: Approximately 32 linear feet of 1/4" bead.