How To Replace Front Brakes 2005-15 Nissan Xterra

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ia/1ABFS01234
New Brake Rotor Set from 1AAuto.com http://1aau.to/ia/1ABFS03622
New Brake Pads from 1AAuto.com http://1aau.to/ia/1ABPS02705

Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2005- 2015 Nissan Xterra.

• Check here for more videos on the 2005-2015 Nissan Xterra:    • Nissan Xterra 2005-2015 2nd Generation  

This repair was done on a 2005 Nissan Xterra Off-Road 4.0L and the process should be similar on the following vehicles:
2005 Nissan Xterra
2006 Nissan Xterra
2007 Nissan Xterra
2008 Nissan Xterra
2009 Nissan Xterra
2010 Nissan Xterra
2011 Nissan Xterra
2012 Nissan Xterra
2013 Nissan Xterra
2014 Nissan Xterra
2015 Nissan Xterra

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/opc/1AXAA00013
• 14mm Socket http://1aau.to/opa/1AXAA00015
• 19mm Socket
• 21mm Socket
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. http://1aau.to/oh/1AXAA00278
• Brake Caliper Hanger http://1aau.to/oah/1AXAA00439
• 3/8 Inch Impact Gun
• Ratchet http://1aau.to/oqm/1AXAA00016
• Socket Driver
• Torque Wrench http://1aau.to/oiT/1AXAA00044
• Anti-Seize Grease
• Brake Grease
• Brake Parts Cleaner
• Paper Towels http://1aau.to/obX/1AXSS00035
• Floor Jack http://1aau.to/oei/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/odY/1AXAA00065
• Wire Brush http://1aau.to/obe/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Nissan Xterra 2005-2015 2nd Generation:    • Nissan Xterra 2005-2015 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.