Stage and Concert Lighting- Chamsys GeNetix Series Stage Lighting Network Products- LDI 2023

Connect with us for more info at https://www.vantageproav.com/contact/

GeNetix Series
On the wall or in the rig, GeNetix simplifies data distribution with a complete range of Nodes, Gateways, Switches and PoE devices. Branch out with these adaptable extensions of our growing family of intuitive networking devices.

GeNetix GN10 - A multipurpose node that provides a solution for remote data distribution in a wide variety of applications, notably offering support for Timecode, MIDI and 10Scene.

GeNetix GN5- A multipurpose node that provides a solution for remote data distribution in a wide variety of applications, notably offering support for Timecode, MIDI and 10Scene.

GeNetix GN2- A two-port Ethernet-DMX node that is compatible with any console supporting Art-Net and sACN. GeNetix Node 2 can also be used as a USB interface for MagicQ PC systems, unlocking MagicQ into reduced mode when connected via its USB-C or Network port.

GeNetix Wall Mount GW20 & GW21- Male or Female XLR two-port wall mount PoE powered node, available to fit into standard single gang EU/US & UK backboxes. Available with either male or female physical RDM Direct DMX ports, both versions support both DMX Input or Output. GeNetix Wall Mount Node 2 is ideal for any fixed installation, supporting Art-Net and sACN and configurable from ChamSys consoles, via its in-built web server or over Art-Net.

GeNetix Switch GS8- An eight-port unmanaged Gigabit PoE network switch that provides a total output of up to 200W of Power over Ethernet across its 8 ports. Ports 1-4 support IEEE 802.3bt up to 100W per port. In modes A & B, all ports support 802.3af and 802.3at standards. This rack mountable switch features a rear PowerCon True1 Mains input connector and is also truss mountable via its M12 threaded insert.

GeNetix Switch GS51P- A five-port IP65-rated unmanaged Gigabit network switch that can be powered either via PoE or via Mains power to its PowerCon True1 Mains Input connector. This compact and rugged all-weather device comes with multiple rigging options for easily mounting in your rig. Port Status LEDs provide visual indication to know if ports are connected/active and if running at Gigabit speed.

GeNetix 10Scene Gateway- A 10Scene Gateway is the interface to connect between 10Scene wall plates and MagicQ/QuickQ systems. Converting from the 10Scene to ChamSys remote protocol, allowing 10Scene Wall plates to integrate with MagicQ & QuickQ consoles.

GeNetix 10Scene Wall Plates- The 10Scene Wall Plate features ten 10Scene trigger buttons, with dual colour LED status indication.

Connect 10Scene wall plates directly to the QuickQ Rack or to the SnakeSys Gateway interface, where it can then integrate with any MagicQ or QuickQ system for remote Scene activation.

Supplied in a dual pack containing two wall plates available in either EU or US back box fit and with two black and two white clip on faceplates to go with.