Moto G72 battery replacement | how to change moto g72 battery

Replacing the battery on a Moto G7 Power requires careful handling and the right tools. Here's a general guide on how to replace the battery:

1. **Gather Tools and Parts**: You'll need a replacement battery compatible with the Moto G7 Power, a heat gun or hairdryer, a plastic prying tool or guitar pick, a screwdriver set (including a Phillips and possibly a Torx screwdriver), and adhesive if the replacement battery doesn't come with pre-applied adhesive.

2. **Prepare the Phone**: Power off your Moto G7 Power and remove the SIM tray. Ensure the device is completely powered down before proceeding.

3. **Heat the Back Cover**: Use a heat gun or hairdryer to gently heat the back cover of the phone. This softens the adhesive holding the back cover in place and makes it easier to remove.

4. **Remove the Back Cover**: Once the adhesive is softened, carefully insert a plastic prying tool or guitar pick between the back cover and the frame of the phone. Slowly work your way around the edges, gently prying the back cover away from the device. Take your time to avoid damaging the phone or breaking the back cover.

5. **Disconnect Components**: Before removing the battery, disconnect any cables or connectors that are attached to it, such as the battery connector and any other relevant components.

6. **Remove the Battery**: Once all cables and connectors are disconnected, use a screwdriver to remove any screws securing the battery in place. Then, carefully pry the battery away from the device's frame. Take care not to puncture or damage the battery.

7. **Install the Replacement Battery**: Place the new battery into the device's frame, ensuring it is properly aligned. Reattach any screws that were removed and reconnect any cables or connectors that were disconnected.

8. **Reassemble the Phone**: If you removed the back cover, reattach it to the device's frame. Make sure all clips and screws are properly secured.

9. **Test the Battery**: Power on your Moto G7