052 Grooving plane - Planes for planemaking / Woodworking

Today i decided to start new series of videos. I call it "Planes for planemaking".
I'm gonna build some moving fillisters with dovetailed boxing (the same as in 0:21-0:45) so it's time to prepare another tools that i need for this project. Some of you probably think "hey, you can do it with any router.." and you have right, but if i want to build it only with my hand tools i can't use it. My router is the best in catching dust.
In this project i'm gonna build grooving plane wich will help me to cut a female part of the joint.
For the body i used spalted beech, for boxing boxwood (if you dont know what it is go to description of 046 video), NCV1 steel for the iron. The finish was preety simple - one coat of boiled linseed oil and two coats of antique oil. Oh, for gluening i use hide glue.
Very often you ask me about my stamps. The smaller one was made by grawernia dot pl and is hardened so i can use it on metals. Two bigger stamps were made by Mirock's Toolworks as one stamp. It was a real challange to use so big stamp so i decided to cut it in half and make two.

I hope you will like this video, i know it is quite long but i can't show you less :)
If you are new here please consider subscribtion for more.

Cheers!




BTW. I don't take orders and usually i don't sell my planes.
The most sure way to get some of them is take a part in giveaways for my supporters.
For support click here:
https://www.youtube.com/channel/UCPWT...

or use my PayPal account: esortodox@gmail(dot)com




Big thanks for my supporters!
ANDREW DAWSON
JOSHUA LUCAS
ROSS TOMAZIN
RENE POLAK
LUBOS SULC
SCOTT MARTIN
BRIAN NEWTON
ŁUKASZ JASIŃSKI
MIKE ETHERINGTON
MELINDA JOHNSON
SOTIRIS ZACHAROPOULOS
ARTUR PIETREK
WILLIAM C ALLEN
MACIEK ŁASZCZ
ALLEN MOCK MD
ANDIEJOY
PAWEŁ CUDNOCH
WORKLION
WILL CLINGON
PMEWUK
VLADIMIR EPIFANOV
MU YI YUN
PAWEŁ KNAPIK
EDWARD FASSLER
PATRICK KONSOR
ŁUKASZ CZYŻYKOWSKI
PATRYK MIKOŁAJCZAK
CLIFF HEWITT
FRANK AGEE
CARLO PIERRACCI
STEVE ALDERETE
SLOMKAADAS
WALTER GRUBE
BRYAN TRETHEWAY


....................................................................................................
For more check my instagram profile:
  / stavros_gakos  



Remember to subscribe my buddy, Łukasz Giergasz
(with engilsh subtitles)


Click here:
   • Jak zrobić stolarski kątownik który T...  


Some cleaning: (0:00)
Presentation of moving fillister: (0:21)
My simple draw for this project: (0:47)
Preparing the body: (1:22)
NCV1 steel for the iron: (2:20)
Drawing all the angles: (2:39)
Cutting the groove for boxing by 200 years old plow plane: (3:44)
Preparing the boxing: (6:01)
Gluening with hide glue: (9:11)
*#!!*% Shit happens ..: (9:50)
Cleaning the floor: (10:27)
Glued boxing: (10:40)
Trimming the end of the boxing: (11:11)
Marking the rabbets on the sides: (12:33)
Planing the rabbet on one side: (13:14)
Cutting the throat: (14:17)
Removing yhe waste: (15:19)
The mortise: (16:48)
Fitting the mortise to temporary wedge: (20:11)
Planing the second rabbet on the side: (21:08)
Making the cove on the shoulders: (21:45)
Cleaning the bootom side: (22:54)
Chamfering: (23:13)
Stamping: (25:53)
Preparing the tapering iron: (26:39)
Stamping: (28:03)
The mouth opening: (28:11)
Grinding the bevel: (29:05)
Checking the mouth: (29:15)
The abutment chamfering: (29:47)
Flattening the back of the iron: (30:32)
Hardening: (31:25)
Tempering: (31:55)
The iron before sharpening: (32:04)
Sharpening: (32:26)
Quick test on boxwood endgrain: (33:45)
The wedge: (34:08)
One coat of boiled linseed oil: (34:22)
Finished plane - presentation: (34:50)
Testing: (35:18)
Thanks for watching: (39:00)