Comprehensive Review: Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks

Click for more info and reviews of this Erickson ATV-UTV Tie Downs:
https://www.etrailer.com/ATV~UTV-Tie-...
Check out some similar ATV-UTV Tie Downs options:
https://www.etrailer.com/dept-pg-ATV~...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Eric...
Hey everybody, I'm Ellen here at etrailer.com, and we're going to be taking a quick look at the Erickson tie-down kit for your wheeled vehicle, so if you're using an ATV, UTV, lawn mower, golf cart, or anything else, this is gonna be a nice kit to make sure that vehicle is secure, and safe inside your trailer. I like this because it's gonna give you really high visibility on these chocks, so you're driving up, you can see where they are, and kinda aim for 'em, and also it's just gonna give you a really nice snug fit around that tire. So, as you're coming up, you'll have your two chocks for the front or back wheels, and it's going to hold really securely around that wheel to give you a nice, snug fit. And then one of our straps is gonna come up and go around that wheel to make sure that there's no movement within that. So you should really be able to cinch that down, make sure that your tires aren't going anywhere, therefore your vehicle's not going anywhere. Let's take a closer look and I'll talk a little bit more about the specs with this to make sure that it's the right fit for you.

So again, high visibility yellow, it's got a nice powder coat on it to make sure that there's no rust or corrosion, so even if this is an open utility trailer, you shouldn't have to worry about that too much. It is just a bolt-on installation, so there's six holes per chock, 24 bolts or screws to get that in place. You'll have two spots on each of these for your strap to go, so it can accommodate different sizes of tires. And then again, that strap is just going to lock in place with that E track fitting, which is pretty typical of any other E track accessory, so we've got our attachment point here. Open it up, lock that in place.

Bring our strap up and around, and over our wheel, and then we just attach it into the other side of that chock. So it should really help to give you a strong attachment point to your vehicle and also with having the dedicated chocks, it's gonna make it easier to kinda plan out your space, so if you've got a utility trailer or an enclosed trailer, especially, you might want to put some toolboxes in there, or something else, that's gonna kind of help you to plan out your space so you always know you can park your vehicle in that one spot and still give yourself enough room for anything else you might want to transport in there. So I kind of like it for that. I'm just kind of giving you a floor plan for your trailer, if that's something that interests you. As far as the specs, our straps measure two inches wide, seven and a half feet long, so should be good for any tire sizes between 10 inches and 30 inches in diameter, the max load that each strap can take is 4,500 pounds, but you want to go off of the safe working load limit, which is 1,500 pounds.

With the straps combined, that does give you a combined safe working load limit of 3,000 pounds. So as long as your vehicle is at or below that number, you should be fine as far as being safe with these guys. That's pretty much all there is to it. I will give you some measurements on the chocks just again, to make sure you can fit those in. Shouldn't be too bad.

The width is about five inches, maybe a little bit more than five. And then, about eight inches long, and about 2 3/8ths inch tall. That's pretty much all there is to it for our quick look at the Erickson ATV E track tie down kit. I hope that this has been helpful in deciding if this is the right kit for you. We do have a lot of other trailer accessories here at etrailer.com, so be sure to check them out, and thanks for watching..