Скачать или смотреть Repair broken Klipper on Neptune 4 Plus

00:00 Introduction
01:34 Download firmware
03:44 Copying configuration files
06:03 Removing existing Klipper
07:59 Creating Update USB Stick
09:15 Firmware installation

Firmware page:
https://www.elegoo.com/pages/3d-print...

Make a copy of all your files, event if there are broken:
klipper_config
printer_data
fluidd-config
moonraker-env

Removes klipper and moonraker using kiauh.sh:
./kiauh/kiauh.sh

Remove configuraation folders:
sudo rm -rf klipper_config
sudo rm -rf printer_data
sudo rm -rf fluidd-config
sudo rm -rf monraker-env

Install commands for the update packages from Elegoo:
Insert the usb stick to the printer and type (first package):
sudo dpkg -i /home/mks/gcode_files/sda1/ELEGOO_UPDATE_DIR/ELEGOO_APP.deb
sudo reboot

Second package:
Remove the ELEGOO_UPDATE_DIR from the usb stick. Copy the ELEGOO_UPDATE_DIR/ELEGOO_FIX_BAG.deb.deb folder to the root folder of your stick.
sudo dpkg -i /home/mks/gcode_files/sda1/ELEGOO_UPDATE_DIR/ELEGOO_FIX_BAG.deb
sudo reboot


Install fluid using ./kiauh/kiauh.sh

Got to cd moonraker/scripts and execute
./sudo_fix.sh

Activate the moonraker by disabling and re-enabling the service
sudo systemctl disable moonraker
sudo systemctl enable moonraker
sudo reboot