Скачать или смотреть How to Install DEI Titanium Header Wrap

The TREMEC install is done! Now time to install the exhaust, but first, let's use some DEI Titanium Header wrap to keep the brake lines from getting too hot! Should be a fun learning experience, because I've never done this before. If I can do this at home, so can you! "How to Install DEI Titanium Header Wrap" can be applied to all makes and models of performance cars.

NEW! FMG MERCHANDISE available! Here's the online store for shirts (pick a color), and face masks, (Grey, Black, or Red) https://fmgmerch.threadless.com/

This is a very thorough description of what to do, how to do it, and what to watch out for. Mike is at the tail end of rebuilding his Pontiac 400, which is now a Butler Performance 467, because a Roller Lifter Broke! (see link below). And installing a New TREMEC TKO 600 from Silver Sport Transmissions.

Subscribe by clicking this link; youtube.com/fastmontysgarage?sub_conf...

Here's a link to Design Engineering's wrap product. https://www.designengineering.com/pro...

Here's the DEI Titanium wrap kit I bought, from Amazon https://www.amazon.com/dp/B00B82XA3S?...

Another useful heat barrier is their sheath for fuel lines, etc... https://www.amazon.com/dp/B000E267M4?...

Here's the original Hydraulic Roller Lifter Fail Inspection, and process:
   • Something is still WRONG with my Pontiac 4...  

Here's the Official Part 1, where Mike starts the preparation of Engine removal
   • Pontiac V8 Camshaft Removal,  Part 1: Engi...  

Here's the start of the TREMEC installation,    • How to install a Wilwood Hydraulic Clutch ...  

Enjoy, and ask questions by leaving a comment below... See you on the other side!

See the build pics, before and after, at www.fastmontysgarage.com
Instagram/fastmontysgarage

#GarageBuilt #Pontiac #DEIwrap