2007 Honda Fit Base full brake job (unboxing, prep and installation)

Finally : new genuine pads and rotors installation after great deal from inventory clearance.
For installation skip to 5:55 but remember, meticulous shim installation is the key for noise free operation
I used dial indicator to check new rotor run-out
Sprayed the hub with thin layer of graphite lube
Tools used:
12/14 mm box end wrench and 19 mm combination wrench for caliper bolts
17 mm socket for caliper bracket bolts (80 foot-pounds of torque)
6 inch C-clamp to seat caliper piston
Hammer on impact bit driver with Phillips #3 and #3 screwdriver for rotor mounting screws
Dial indicator with magnetic mount
NAPA silicone caliper guide lubricant
Anti-seize (use with common sense!)
Extra tools may be needed.
Filmed with upside down mounted dash cam
Video can be used by ET-MT students to study process motion elements (Therbligs)