Скачать или смотреть PPM Defibrillator Zen version in 4K

This is Biomedical engineering.
Imagine that you have profession which role is to test thousands of equipment every year in search of several which did not pass the test. And you need to be always precise and should not lost concentration because any mistake you do can cause patient harm or death.
The equipment are called Medical devices and profession Biomedical engineering.
Preventive maintenance takes from simple ten minutes procedures to hours depend on type of equipment. As it is called Preventive, by following certain steps and in some cases even changing some parts, Biomed tries to prevent a situation where a medical device is not ready for patient care when it is needed the most.
In the following video I perform PPM on a defibrillator, life saving, critical equipment used in every hospital department.
Original procedure takes approximately 30 minutes. For best clarity, please select 1080p or higher in video settings.

00:08 Preventive maintenance (PPM) Defibrillator procedure
00:17 Electrical safety measurements
00:29 Please do not forget to connect therapy cable for patient leakage measurements
06:32 Defibrillator analyzer measurements
09:45 Charge time test
10:17 Synchronization time test
11:09 Pacer parameter tests
12:57 Battery capacity test
16:48 Patient impedance test
18:29 Patient monitor parameters verification: ECG,Sp02,NIBP,IBP1,IBP2
25:33 Please always leave cables and device in better condition than you found them
27:17 Service menu tests
27:35 CO2 measurement verification
28:42 Button test
29:05 Pixel test
29:16 Printer test
29:49 Service log check
30:03 Voice tone check
30:56 User test
32:01 Battery and connection check
33:06 PPM protocol