Reverse Forward Starter Control Circuit Diagram | Reverse forward Starter Power wiring..

@AzElectricSchool

A Reverse Forward Starter Control Circuit is a type of electrical circuit commonly used in industrial applications to control the direction of rotation of electric motors. It allows the motor to be started, stopped, and reversed as needed. Here's a basic description of the circuit components and their functions:

Power Supply: The circuit typically starts with a power supply, usually AC mains power. This is the source of electrical energy for the entire circuit.
Main Contactor: The main contactor is a heavy-duty relay that connects or disconnects the motor from the power supply. It is controlled by the start and stop buttons in the circuit.
Start Button: This button is used to start the motor in the forward direction. When pressed, it sends a signal to the main contactor to close, allowing current to flow to the motor.
Stop Button: The stop button is used to stop the motor. When pressed, it sends a signal to the main contactor to open, cutting off the power supply to the motor.
Reverse Button: This button is used to start the motor in the reverse direction. When pressed, it sends a signal to the reverse contactor to close and the forward contactor to open, reversing the direction of the motor.
Overload Relay: The overload relay is a protective device that monitors the current drawn by the motor. If the current exceeds a preset value, indicating an overload or fault, the overload relay will trip, cutting off power to the motor and preventing damage.
Forward Contactor: This contactor controls the forward direction of the motor. When closed, it allows current to flow to the motor in the forward direction.
Reverse Contactor: This contactor controls the reverse direction of the motor. When closed, it allows current to flow to the motor in the reverse direction.
Interlocking Mechanism: There are interlocks in the circuit to prevent simultaneous closure of forward and reverse contactors, which could lead to a short circuit.
In operation, when the start button is pressed, the main contactor closes, allowing current to flow to the motor in the forward direction, starting it. When the stop button is pressed, the main contactor opens, stopping the motor. Pressing the reverse button closes the reverse contactor and opens the forward contactor, causing the motor to run in the reverse direction. The overload relay provides protection by tripping if the motor draws too much current, indicating a fault.

This circuit ensures safe and controlled operation of electric motors in industrial settings, allowing for precise control of direction and starting and stopping of the motor as required.




video
   • Electrical House Wiring 4 |  @azelect...  


Video
   • 3 Phase Motor Star || Connection With...  


Video
   • electrical house wiring diagram | | #...  


Video


   • single phase motor stater || Connecti...  


Video
   • Видео  


Video
   • Видео  


Video
   • Autocratic connection two motor start...  



Please Following me Telegram
https://t.me/azelectricschool



Please follow me TWITTER
https://twitter.com/azelectricscho1?t...

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
our bunss contact :-
Email : [email protected]

/////////////////////////////////////////////////////////////




{{{{{{{{{{{{{{{{{{{{{{{}}}}}}}}}}}}}}}}}}}}}}}}}}}}
Please Subscribe my channel
   / @azelectricschool  
}}}}}}}}}}}}}}}}}{{{{{{{{{{{{{{{{{{{{{{{{{{{{




#electricalengineering #connection #electrical #switch #AzElectricSchool