(Installation Video) 2020 BMW S1000RR Fender Eliminator / Tail light JL Designs

Installation Video for:
Part # S1K-FE (MADE IN USA)

Visit www.jld7.com

See our other Eliminator Kit using the Stock BMW lights:

   • (Installation Video) 2020 BMW S1000RR...  

Kit includes:
Billet machined license plate bracket (machined from solid alloy, then anodized), 5mm white LED license plate light (plug & play), Swivel license mount. No stamped & folded steel here.
Set of Rear tail lights, used for running, brake and turn signal functions. Machined light enclosures holding 30 LEDs. Made to fit into the recessed spots in undertail.
All black hardware for license plate and bracket included
2 zip ties
Wire butt connectors (we recommend soldering)

Tools we used:
Torx bit T-25
3mm allen key or socket
4mm allen key or socket
Wire Cutters
Wire Strippers
Small flat head screwdriver
Loctite (medium strength)
Drill with drill bit (for small 2 wire hole) 3-5mm hole
Cleaning solution with towel (wipe clean the surface prior attaching adhesive)
If using butt connectors, pliers or a crimp tool is needed to squeeze them to the wire

If soldering:
Soldering iron
Shrink tubing
Pliers (optional)