How I built my Homemade Hand Engraving Machine Part 2 Modify 12v compressor

Modifying a 12volt compressor/tire inflator
Bore = 1.183 Stroke = .500 Volume =.5496 Cu in

👉(((Email me at [email protected] for Free Blueprints)))👈

See video Part 1 for Parts List.
12v Pittsburgh air compressor/inflator $35.99 Harbor Freight
https://www.harborfreight.com/12v-100...
1/8 in OD x 1/8 in MIP LFA-21A $4.50 Hardware store
https://www.homedepot.com/p/Everbilt-...
Drill through above fitting .170 dia. Min.
1/4 in OD x 1/8 in FIP LFA-15 $3.50 Hardware store
5 second fix or epoxy Hardware store
10 feet 1/4 in OD x .170 ID clear tubing $1.75 Hardware store
5/16-24 set/grub screw Hardware store
Basic hand tools
TIP;
The above parts are what I was able to find at the hardware store,
not knowing what your store is going to have in stock I would suggest
taking the head of the compressor with you to try what they have until
you are able to adapt it for the 1/4 inch tubing. If your lucky there may
be someone who can help you.

video part 3; I will modify the 50 cal. ammo can.

Sergey Waltman    • Коментарии к изготовлению пневмоштихе...  
Shaun Hughes channel:    • The Homemade Hand Engraving Machine  
   • How to adapt any compressor for the H...  ther videos on building a machine;
Nejc Mazej;    • Видео  
Karl Månsson;    • Home made hand control pneumatic grav...  
Cliffs Shed;    • Pt 1 Shaun Hughes inspired graver and...  
Joaquin Ryder;    • Pneumatic engraving machine, homemade  
NightProwlerInc;    • How to / DIY Air Powered Hand Engravi...  
   • Hand Air Engraver  
   • Making a Pneumatic Engraver: DIY Hand...