Configuring the Kaleido Roaster Pro with Artisan software on a Mac

To configure the Kaleido Roaster Pro with Artisan software on a Mac, follow these steps:

Install Artisan Software:

Download the latest version of Artisan from the official website.
Open the downloaded file and drag the Artisan icon to your Applications folder to install it.
Connect the Kaleido Roaster Pro:

Use a USB cable to connect the Kaleido Roaster Pro to your Mac.
Ensure the roaster is powered on and properly connected.
Open Artisan Software:

Launch Artisan from your Applications folder.
Configure Artisan for Kaleido Roaster Pro:

In Artisan, go to the “Configuration” menu and select “Hardware” or “Devices.”
Choose “Kaleido Roaster Pro” from the list of available devices or input the appropriate settings if it’s not listed.
Ensure the correct port is selected. Artisan should automatically detect the connected roaster, but you may need to manually select the appropriate USB port if it does not.
Calibrate and Test:

Follow any additional calibration steps required by Artisan to ensure accurate temperature readings and control.
Test the connection by running a short roasting cycle to verify that the roaster and Artisan are communicating properly.
Save Configuration:

Once everything is set up and tested, save your configuration in Artisan to ensure your settings are preserved for future use.
If you encounter any issues, consult the Artisan documentation or support resources for troubleshooting tips.