KTM 1290 - FRONT WHEEL REMOVAL - TO REPLACE TYRE

KTM FRONT WHEEL REMOVAL - Many will know how to do this; this video is for those that don't. An easy job, but take care of the front ABS rotor when lifting the front of the bike on the paddock stand. Re-assembly is just the reverse. I'm heading off to Europe now camping for 6-8 weeks. Fresh tyres (Angel GT's) and fully loaded. Trip video, tyre wear, handling feedback all to follow. If you want to see, please subscribe. x
Torque settings (From workshop manual):
Axle Spindle (large screw) 12mm Allen = 45nm (33.2 lbf ft) H12)
Front Axle Bolt {M25} = 45 nm (33.2 lbf ft)
Brake Caliper {M10} = 45 nm (33.2 lbf ft)
Speed Sensor {M6} = 4 nm (3 lbf ft)
Axle Clamp Screws {M8} (2 each side) = 15 nm (11.1 lbf ft)
Manual says use Loctite 243 but I use any "medium strength" threadlock.