Rotary Axis for my Gatton CNC - Part 3 – Mount and First Run

Rotary Axis for my Gatton CNC - Part 3 – Mount and First Run

More down here ↓↓↓ Click SHOW MORE!


I apologize in advance for the audio in this video!

In this video, I’ll give you a brief overview of the mount I made for the rotary axis kit I purchased for my Gatton CNC. I’ll give you a demonstration of how I position the gantry, set my X, Z, and A axis zeros, then show you how I mounted a piece of cedar in the rotary axis. Then we’ll fire it up and turn my first project.

Here’s the link to my website article, which accompanies this video.
https://marklindsaycnc.com/index.php/...


As usual, if you have any comments or questions about anything I’ve covered in this video, please put ‘em in the comment section below.

Thanks for watching!


Link to the Larson Center Finder - https://amzn.to/2HSgeG6

Zinsser Seal Coat Sanding Sealer - https://amzn.to/2rjrN2a


Link to Dave Gatton’s website, where you can get info on a Gatton CNC kit of your own!

http://www.davegatton.com/


Here are the links to the rotary axis itself, and everything I used to run it with my Xylotex Drive Box:

Sunwin Model 073 Hollow Spindle Rotary Axis - http://amzn.to/2rK8ulU

Timing Pulley - https://bit.ly/2qs0L8h

(Make sure to select 6.35mm bore diameter, for 15mm wide pulley, and choose the number of pieces you want.)

Xylotex 4 amp 425 in oz Stepper Motor - https://bit.ly/2GXmQqj

6 foot Extension Cable for Xylotex Stepper Motor - https://bit.ly/2qAILIP

HTD 5M – 355 Timing Belt - https://bit.ly/2Hvvv0e

(Be sure to select 15mm width and 355mm length)


Disclaimer: Some links may be affiliate or sponsor links. Clicking through these links helps with the making of future videos. I appreciate your support!

My website https://marklindsaycnc.com/ is sponsored by Harneal Media, who specializes in websites for makers and creators:

https://harnealmedia.com/

I’m a proud founding member of the Maker’s Media Network.

Come check us out at: http://makersmedianetwork.com/

Get your Official Mark Lindsay CNC t-shirts here:

http://marklindsaycnc.com/index.php/p...

This video is for informational and entertainment purposes only.
Some of the link above may be affiliate links. Using these links will help support me and the content I provide for free. Thank you very much for your support!