3D printed radio-controlled HD FPV plane!

In this video, I show how I designed, built, and flew a 3D-printed radio controlled plane with a high definition FPV (first-person view) system. I was shooting for 250g but came out a little over that at 270g. It uses the Walksnail Avatar Nano FPV system. The design was done mostly in FreeCAD with a little bit of help from Moment of Inspiration for some of the complex curved parts.

I use a ground station rather than goggles to view the live video while flying. The ground station setup is also 3D printed and shown in the video.

If you are interested in building one yourself, the STL files are available on thingiverse: https://www.thingiverse.com/thing:669...

Music:
Headlands and A Truly Dazzling Dream by National Sweetheart
Last Train North by TrackTribe
All from the YouTube Audio Library