Скачать или смотреть 2.2 tiles floor

2.2 tiles floor #YouTube short #trending short


Clean the floor properly. Remove dust, oil, loose particles, and old mortar.
Check the level of the surface and repair any uneven areas.
2. Level Marking
Mark the finished floor level using a water level or laser level on all walls.
Fix reference lines to maintain proper slope and alignment.
3. Mortar Preparation
Prepare cement mortar in a 1:4 ratio (cement : sand) or use ready-mix tile adhesive as per manufacturer instructions.
Mix well to a workable consistency.
4. Spreading Mortar
Spread the mortar evenly on the floor using a trowel.
Apply mortar only in small areas to prevent drying before tile fixing.
5. Tile Laying
Start laying tiles from one corner or from the center of the room.
Place each 2×2 tile gently on the mortar and press it firmly.
Tap lightly with a rubber mallet to ensure proper bedding.
6. Level Checking
Check the level of each tile using a spirit level.
Maintain uniform joints using tile spacers.
7. Cutting Tiles
Cut tiles where required using a tile cutter or cutting machine to fit edges and corners properly.
8. Joint Filling (Grouting)
After 24 hours, fill the joints with white cement or suitable grout.
Clean excess grout with a damp sponge.
9. Curing and Cleaning
Allow the floor to set for at least 24–48 hours.
Clean the surface properly after curing.
If you want, I can also explain this in very simple English, step-by-step site language, or with tools list.