Cross Stitch (Flosstube) #15 - DIY Lap Stand

NOTE: I USED PVC PIPE LABELED AS 3/4 INCH, SOME PLACES WILL HAVE THIS LABELED AS 1/2 INCH. IT DEPENDS IF THE MANUFACTURER IS MEASURING THE INTERIOR OR EXTERIOR DIAMETER OF THE PIPE. MAKE SURE YOU CHECK YOUR PIPE WITH A Q SNAP CLAMP PRIOR TO PURCHASING. MAKE SURE YOUR QSNAP CLAMP FITS!

This is the first time I've attempted to record an actual tutorial. Hopefully it makes sense. The lap stand is made of PVC pipe but you could probably use any plastic pipe of equivalent strength and dimension.
I found the photo and info for the stand I was interested in on this blog:
https://mommyfang.wordpress.com

Dimensions
5 pieces 3/4 (or 1/2) inch PVC pipe 12 inches long
2 pieces 3/4 (or 1/2) inch PVC pipe 8 inches long
4 pieces 3/4 (or 1/2) inch PVC pipe 2 inches long
6 3/4 (or 1/2) inch 90 degree elbows
2 3/4 (or 1/2) inch 45 degree elbows
2 3/4 (or 1/2) inch T's

Good luck!