1st Gen Toyota Tundra Long Travel Install

This video features a long travel install for a 2000 Toyota Tundra and should be the same or similar for first generation Tundra 2000-2006.

Install included
New steering rack
Total chaos Long travel install
Heim joint steering upgrade
Uniball ball joint conversion

IMPORTANT NOTE
I installed a steering rack because mine was due to fail soon however you do not need to drop the rack for this install. Unbolting the rack and moving it out of the way of the LCA bolts would be sufficient.

Video breakdown

0:00-1:50 Intro
1:51-3:18 steering rack first glance/getting truck in the air
3:20-4:34 remove sway bar
4:35-7:16 remove steering rack
7:17-9:04 LT kit first glance
9:35-11:05 axle nut, brake line, caliper removal
11:06-13:14 spindle removal
13:15-13:54 upper control arm removal
13:55-14:29 Coilover removal
14:30-15:30 lower control arm removal
15:32-16:23 axle and LCA comparison
16:24-17:25 extended brake line swap
17:26-18:20 axle swap
18:21-20:22 Lower control arm install
20:23-22:22 Coilover install
22:23-23:20 uniball lower ball joint install (12mm Allen is needed to torque bolt)
23:21-24:27 Upper control arm install
24:28-26:13 spindle install to ball joint
***CORRECTION AT MIN 27 THE SPACER IM SPEAKING OF IS A REPLACEMENT FOR THE SPINDLE HELD IN BY A C-CLIP
26:14-29:17 upper control arm spacer and install to spindle
29:18-31:04 brake line and caliper install
31:53-35:50 steering rack alignment and total chaos bushings
35:51-38:16 steering rack install
38:17-end Heim joint steering and finale

Instagram: dr_omiz and thedirtbaggarage

DO NOT ATTEMPT THIS INSTALL IF YOU DO NOT HAVE THE PROFICIENT SKILLSET OR TOOLS TO COMPLETE