Part 2 of Replacing The VCT Units on a 3.5L Ecoboost!

This is part 2 of my process in performing the repair for the VCT unit rattling noise on a cold start up on a 2017 Ford F-150 3.5L Ecoboost. The VCT rattling noise on cold start up and at idle is a common issue on these engines and I have done plenty of them in my career as a automotive tech. I am bringing you along and showing you the entire process of tearing down everything and getting to the actual VCT units and replacing them. Again this is not a very in depth guide on "How To" replace the VCT, but just an overall walkthrough and a visual on what it takes to do this repair.
Hope You Enjoy and Godspeed ✌️

---------------------------------------------------------------------------------------------------------------------------------

--- Please excuse the poor audio quality and my breathing into the mic. I'm still trying to figure out the best audio recording options for these type of videos, so I will greatly appreciate your grace as I continue to figure that out. Thanks! 😊 --

---------------------------------------------------------------------------------------------------------------------------------

0:00 - Removing All The Acessory Drive Components
4:23 - Removing The Timing Cover
5:09 - Removing The Timing Chain & VCT Units
11:30 - Cleaning The Mating Surfaces
12:15 - Installing The New VCT Units
13:40 - Installing The New Timing Components
18:43 - Putting Everything Back Together
20:55 - Finally Touches and Starting The Truck
23:40 - Outro

-----------------------------------------------------------------------------------------------------------------------------------
Music in video

Song: Matey
Artist: Jobii
Link: https://www.epidemicsound.com/track/8...

Outro Song: Quavi
Artist: Azucares
Link: https://www.epidemicsound.com/track/j...

--------------------------------------------------------------------------------------------------------------------------------------

#ford #mechanic #engine