How to Replace Ignition Coil Boots 2009-2010 BMW 535i xDrive 3.0L L6

Buy Now!
New Ignition Coil Boot Set from 1AAuto.com https://trq.video/ib-1AERK03559

This video shows you how to install a new ignition coil boot in your 2009-2010 BMW 535i xDrive 3.0L L6. Ignition coils help your vehicle's engine run efficiently, cleanly, and smoothly. Rough running, lower than expected mileage, or trouble codes are sure signs that it's time to replace yours.

Estimated installation time for a professional technician is approximately: 12 minutes

This repair was done on a 2009 BMW 535i xDrive Base 3.0L AWD and the process should be similar on the following vehicles:
2009 BMW 535i xDrive
2010 BMW 535i xDrive

Tools you will need:
• Flat Blade Screwdriver https://trq.video/obYy-1AXAA00013
• Phillips Head Screwdriver https://trq.video/obYy-1AXAA00013
• Pocket Screwdriver
• 13mm Socket https://trq.video/ocCk-1AXAA00015
• 5mm Socket https://trq.video/ob7C-1AXAA00017
• Trim Tool Set https://trq.video/oaNk-1AXXX00006
• T45 Driver
• Bungee Cord
• Dielectric Grease
• Gloves https://trq.video/obTx-1AXSS00048
• Safety Glasses

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.