Ford Explorer Sunroof Initialization

How to initialize or reprogram the sunroof motor own 2012-13-14 explorers. May work for other years as well
Note: Not for the sunshade as well. I do say "sunroof and sunshade" at the beginning, but that was a misspeak because I do so many for F-150's, for which the one procedure does both. This one is sunroof motor only.

Here is the video of how to reset/program the shade. I said in this video I was going to do both, then I watched it and realized I forgot to do the shade, so I did one just for that:
   • 2014 Explorer Sunshade Initialization...  

Here is the procedure:

NOTE: The driver or passenger front door must be open during the entire procedure.Open the driver or passenger front door.2. Turn the ignition to the ON position.3. Complete the following within 5 seconds: - Cycle the ignition to the OFF position and then back to the ON position.- Push the TILT switch for less than one second and release.- Push and hold the TILT switch until full glass open and closed is witnessed (this could take up to 20 seconds to start).4. Release the switch and verify successful initialization by carrying out one-touch open, one-touch close and one-touch vent operations.