Nvidia CMP 100-210 Cooling Shroud Mod

About the mod:
This mod is the most effective, affordable, and plug and play version available
Install is simple and can be reversed

Efficiency Stats:
This shroud kit decreases temperatures by about 10-15c on the core and 10-15c on the Memory in 75f ambient air temp with GPUs running on Kawpow and no OC's at about 240w per card. See pictures for HiveOs screenshots.

Mod Material:
Shrouds are 3d printed with PETG that has a melting point of 200c which is a much higher temperature than the cards are able to reach.

Mining Case Compatibility:
It is highly recommended that these shrouds are used with a case that allows the cards to be installed against the outer wall of the case for optimum results. See pictures.
It is also highly recommended that any extra air holes in your mining case are taped off so that maximum air flow is directed through the heat fins of the GPU. See pictures.

Want to purchase?
www.ebay.com/itm/305907228196

What's In The Kit:
Your choice of a 6 or 8 pack of shrouds and 2 mounting screws per card.
You will need a M4 hex screwdriver to install the mod.

#3dprinting #nvidia #crypto #cryptomining