My First Drift event: Learning How To Drift In My Low Power KA24DE 240SX At Shotsu 2023

I'm new to drifting and decided to somewhat document my progression along the way. Since I just finished building my car days before the event I didn't really have much time to practice on the streets, so these are pretty much my first ever attempts at drifting apart from trying a couple of corners when the car was still on its standard 15 inch wheels.

I only brought a gopro to use for onboard videos, but luckily ‪@SkidsnTea‬ filmed some cool outside shots of me sucking at drifting that I could use. go check out his channel if you want to see the whole event and not just me.

As far as mods go, it's a really basic setup: it has a stock but rebuild ka24de with a 3" exhaust, adjustble tention rods in the front and adjustable camber and toe arms in the back aswell as solid eccentric steering rack bushings (it got rid of binding at full lock, but doesnt give any more angle as far as I know), and ofcourse the differential is welded.

and if anyone cares about my wheel or alignment specs: On the front I run about 5° camber, 7°30' caster and pretty much 0° toe, and on the rear I run about 1°40' camber and also 0° toe. And for the wheels:
17x9.25" ET4 SSR Agle Strusse (front)
18x9.25" ET14 SSR Agle Strusse (rear)
17x9" ET14 Panasport G7 (rear, spare)
17x9" ET18 Panasport G7 (rear, spare)