Use G14 to Program Your Lathe Sub-Spindle The Easy Way - Haas Tip of the Day

Programming the sub-spindle on your Haas lathe couldn't be easier. Mark shows us how to use G14 to get this done and also how to setup the tools on your sub-spindle. And you might even gain a new appreciation for G15 that's usually running in the background.

Link to our Bonus Content page where you can find the G14 example program
https://www.haascnc.com/video/Video-B...

Sync Your Spindles with G199
   • Sync Your Spindles with G199! Complex...  

Use G53 Not G28 to Cut Cycle Times and Position Your Lathe Turret
   • Use G53, not G28, to Cut Cycle Times ...  

Set Lathe Offsets Quickly with the ATP Option
   • Set Tools Quickly with the Haas Autom...  

Set Lathe Offsets Manually
   • Set Your Lathe Offsets Manually - Haa...  

Don’t miss any Haas videos. Click here: https://www.haascnc.com/about/Newlett...

Need more reasons why you should consider a Haas? Check this out: https://www.haascnc.com/whyhaas.html

If you enjoyed this video, please hit the like button and share it with a friend who’ll find it helpful . . . and thanks!

Follow Haas:
Facebook –   / haasautomationinc  
Instagram –   / haas_automation  
Twitter –   / haas_automation  
LinkedIn -   / haas-automation