LT&S Outdoor Slatted Trash Can Assembly

To assemble your Lancaster Table and Seating outdoor slatted trash can, position the two receptacle halves together on a firm, flat surface. Align the two pre-drilled holes at the top of the receptacle, insert a Phillips head screw into each hole, and hand-tighten them. Position the completed basket into the receptacle base, aligning the six pre-drilled holes and insert a hex head screw and a washer into each of the six pre-drilled holes - wait to tighten the screws fully.

Shop All Lancaster Table and Seating Outdoor Trash Cans: https://link.webstaurant.store/outdoo...

Shop All Lancaster Table and Seating Trash Can Parts and Accessories: https://link.webstaurant.store/trash-...

Learn About the Different Types of Trash Cans & Recycling Bins: https://link.webstaurant.store/trash-...

Once the Lancaster Table and Seating outdoor slatted trash can halves are properly aligned, tighten all hex head screws around the base using the provided Allen wrench before tightening the Phillips head screws at the top of the trash can with a screwdriver. Attach the security cable to the cable lock bar on the inside top of the receptacle, loop the cable through the lid's lock bar, and secure it with the cable clips. Insert the rigid plastic liner into the receptacle and then place the lid on the interior hooks at the top of the trash can.