Unboxing and Full Review of Bosch GTS 254 Corded Electric Table Saw

Bosch GTS 254 Corded Electric Table Saw To Purchase Amazon Link https://amzn.to/3SB3eer

The power tool is a stationary machine for cutting in a straight line with and against the grain in hardwood, softwood, chipboard and fibreboard. Mitre angles of –30° to +30° as well as bevel angles of 0° to 45° are possible.
It is also possible to saw aluminium profiles and plastic using the appropriate saw blades.

Noise emission values determined according to EN 62841-3-1.
Typically, the A-weighted noise level of the power tool is: Sound pressure level 90 dB(A); sound power level 105 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
The noise emission value given in these instructions has been measured in accordance with a standardised measuring procedure and may be used to compare power tools. It may also be used for a preliminary estimation of noise emissions.
The noise emission value given represents the main applications of the power tool. However, if the power tool is used for other applications, with different application tools or is poorly maintained, the noise emission value may differ. This may significantly increase noise emissions over the total working period.
To estimate noise emissions accurately, the times when the tool is switched off, or when it is running but not actually being used, should also be taken into account. This may significantly reduce noise emissions over the total working period.


Product features

Scale for spacing between saw blade and parallel guide
Scale for spacing between saw blade and parallel guide when the saw table is pulled out
Angle guide
Saw table
Guide groove for angle guide
Protective cover
Anti-kickback pawls
Table insert
Parallel guide
Saw table expansion
Recessed handles
Parallel guide storage compartment
Tilt protector
Base unit
Push stick
Locking lever for setting the bevel angle
Crank for raising and lowering the saw blade
Hand wheel
Safety flap for the on/off switch
Saw table expansion clamping handle
Push stick storage compartment
Stop for 45° bevel angle
Scale for bevel angle
Stop for 0° bevel angle
On button
Restart button
Riving knife
Saw blade
Angle guide storage compartment
Cable holder
Mounting holes on base unit
Mounting holes
Tool/anti-kickback pawls storage compartment
Dust extraction adapter
Ring spanner (10 mm; 13 mm)
Hook spanner/open-ended spanner (10 mm)
"Base unit" fastening set
"Tilt protector" fastening set
"Power tool" fastening set
Riving knife bolt
Recesses for table insert
Anti-kickback pawls push button
Clamping handle for parallel guide
V guide for parallel guide
V guide groove on the saw table for the parallel guide
Guide groove for parallel guide
Additional parallel guide
"Additional parallel guide" fastening set
Guide rail for angle guide
Profile rail
Profile rail wing nut
Lower saw blade cover
Fastening screws for lower saw blade cover
Table insert gripping hole
Clamping flange
Saw blade hexagon screw
Washer
Mounting flange
Angle indicator (vertical)
Locking knob for all mitre angles
Angle indicator on the angle guide
Magnifying glass
Saw table spacing indicator
Cross-head screw for setting the 0° stop
Screw for bevel angle indicator
Cross-head screw for setting the 45° stop
Hex socket screws (5 mm) on the front for adjusting the parallelism of the saw blade
Hex socket screws (5 mm) on the rear for adjusting the parallelism of the saw blade
Screw for saw table spacing indicator
Hex socket screws (5 mm) for adjusting the parallelism of the parallel guide
Screw for parallel guide spacing indicator

Items included

Check to ensure that all the parts listed below have been supplied before using the power tool for the first time:
Table saw with mounted saw blade (28)
"Power tool" fastening set (39) (8 fastening screws, 8 washers)
Base unit (14)
"Base unit" fastening set (37) (16 fastening screws, 16 washers, 16 securing rings, 16 nuts)
Tilt protector (13)
"Tilt protector" fastening set (38) (4 fastening screws, 8 washers, 4 securing rings, 4 nuts)
Angle guide (3)
Profile rail (50)
"Profile rail" wing nut (51)
Parallel guide (9)
Additional parallel guide (47)
"Additional parallel guide" fastening set (48) (2 fastening screws, 2 wing nuts)
Riving knife (27) with protective cover (6) fitted
Anti-kickback pawls (7)
Ring spanner (35)
Hook spanner/open-ended spanner (36)
Push stick (15)
Table insert (8)

🌐 Visit my website for more stories and updates: https://raisingeorge.com

❤️ Support my work and get exclusive content:   / raisingeorge  

🔥If you found this video interesting then please subscribe to my YouTube channel 👉🏽 https://bit.ly/3whEs6g

🔥FOLLOW ME:
👉🏽Twitter:   / raisingeorge  
👉🏽Facebook:   / raisingeorge  
👉🏽Instagram:   / raisingeorge  

#BoschGTS254 #ElectricSaw #BoschUnboxing