Milling VW 02M AWD to FWD gearbox plate on DIY PrintNC - Start to finish

Milling and engraving a Volkswagen 02M 6 speed adapter plate to convert AWD to FWD gearboxes. Some feeds and speeds included at the start of each operation.

00:00 - 03:00 - Roughing with 1/4"
03:00 - 04:09 - 10x Speed
04:09 - 04:58 - Real time final parts of roughing
04:58 - 06:05 - 10x Speed
06:05 - 08:07 - Real time finishing sides with 8mm DLC coated three flute
08:07 - 08:22 - 10x Speed
08:22 - 08:30 - Reflection test
08:30 - 08:43 - 10x Speed
08:43 - 09:27 - Real Time 6mm Chamfering
09:27 - 09:34 - 10x Speed
09:34 - 11:29 - Diamond drag engraving
11:29 - 12:07 - Probing for WCS XYZ0 and rotation correction
12:07 - 12:50 - Real time facing back side with 10mm BAP
12:50 - 13:40 - 10x Speed
13:40 - 14:23 - Cutting O Ring grooves with 1/8" single flute DLC
14:23 - 14:44 - 10x Speed
14:44 - 15:18 - Real time last passes of grooves
15:18 - 15:47 - 10x Speed chamfering
15:47 - 17:19 - Real time small (0.06mm) chamfering grooves
17:19 - 18:16 - O ring fit test
18:16 - 19:12 - Final look at finished part